We're building a better ClinicalTrials.gov. Check it out and tell us what you think!
Working…
ClinicalTrials.gov
ClinicalTrials.gov Menu
Trial record 1 of 3 for:    Sword | HIV
Previous Study | Return to List | Next Study

Bone Mineral Density in Human Immunodeficiency Virus Type 1 (HIV-1)-Infected Adult Subjects Switching From a Tenofovir Regimen to a Dolutegravir Plus Rilpivirine Regimen

The safety and scientific validity of this study is the responsibility of the study sponsor and investigators. Listing a study does not mean it has been evaluated by the U.S. Federal Government. Read our disclaimer for details.
 
ClinicalTrials.gov Identifier: NCT02478632
Recruitment Status : Completed
First Posted : June 23, 2015
Results First Posted : October 20, 2017
Last Update Posted : October 19, 2020
Sponsor:
Collaborators:
Janssen Pharmaceuticals
GlaxoSmithKline
Information provided by (Responsible Party):
ViiV Healthcare

Tracking Information
First Submitted Date  ICMJE May 28, 2015
First Posted Date  ICMJE June 23, 2015
Results First Submitted Date  ICMJE July 27, 2017
Results First Posted Date  ICMJE October 20, 2017
Last Update Posted Date October 19, 2020
Actual Study Start Date  ICMJE June 12, 2015
Actual Primary Completion Date September 16, 2016   (Final data collection date for primary outcome measure)
Current Primary Outcome Measures  ICMJE
 (submitted: October 4, 2019)
Percent Change From Baseline in Total Hip Bone Mineral Density (BMD) at Week 48 [ Time Frame: Baseline (Day 1) and Week 48 ]
Percent change in BMD (expressed as areal density in grams per centimeter square [g/cm^2]) as specified by dual energy X-ray absorptiometry (DEXA) scans of the left 'total hip' which included the femoral neck, trochanter and inter-trochanter areas was assessed by areal density at Baseline and Week 48. The estimated value in the statistical analysis is this difference and the upper and lower limit values shown are the 95% confidence intervals. Baseline was considered as Day 1 and percent change from Baseline was calculated as Value at Week 48 minus Baseline value divided by Baseline value multiplied by 100. An analysis of covariance (ANCOVA) model was used to compare the difference. The analysis was performed on Intent-to-Treat exposed DEXA (ITT-ED) Population which comprised of all participants in the ITT-E Population who received at least one dose of study treatment, and who were registered for the 202094 study.
Original Primary Outcome Measures  ICMJE
 (submitted: June 17, 2015)
Percentage change from baseline at Week 48 in total hip BMD as assessed by areal density in gram per centimeter square (g/cm^2) [ Time Frame: Baseline and Week 48 ]
To generate all BMD outcomes, DEXA scans will be performed using GE Lunar or Hologic (non DOS) scanners by appropriately qualified personnel. BMD will be expressed as areal density in g/cm^2 generated from DEXA scans of total hip which includes the femoral neck, trochanter and inter-trochanter areas
Change History
Current Secondary Outcome Measures  ICMJE
 (submitted: October 4, 2019)
  • Percent Change From Baseline in Lumbar Spine BMD at Week 48 [ Time Frame: Baseline (Day 1) and Week 48 ]
    Percent change in BMD (expressed as areal density in g/cm^2) as specified by DEXA scans of the 'lumbar spine' which included the first lumbar vertebra (L1) to the fourth lumbar vertebra (L4) was assessed by areal density at Baseline and Week 48. The difference is adjusted percent change from Baseline to Week 48 between treatment groups. The estimated value in the statistical analysis is this difference and the upper and lower limit values shown are the 95% confidence intervals. Baseline was considered as Day 1 value and percent change from Baseline was calculated as Value at Week 48 minus Baseline value divided by Baseline value multiplied by 100. An ANCOVA model was used to compare the difference in percentage change from Baseline at week 48 in lumbar spine BMD between the DTG+RPV and CAR arms.
  • Percent Change From Baseline in Total Hip and Lumbar Spine BMD-DTG+RPV Early Switch Group Through Early and Late Switch Phase [ Time Frame: Baseline (Day 1), Week 48, Week 100 and Week 148 ]
    Percent change in BMD (expressed as areal density in g/cm^2) as specified by DEXA scans of left 'total hip' which included femoral neck, trochanter and inter-trochanter areas and 'lumbar spine' which included L1 to L4 was assessed by areal density. Percent change from Baseline is post-dose value minus Baseline value divided by Baseline value multiplied by 100. BMD parameters at Weeks 48, 100 and 148 reflect data adjusted following the ongoing longitudinal and cross-calibration of multiple DEXA scanner instruments in this study. Data presented through Week 48 only represent results of Week 48 Primary Endpoint analysis which applied DEXA scanner calibrations though Week 48, with no subsequent calibration applied. In the final analysis conducted at Week 148, DEXA scanner calibration data acquired from Day 1 to Week 148 was applied to all raw DEXA BMD data at Weeks 48, 100 and 148. Hence, actual values of Week 48 DEXA data may vary slightly between Weeks 48 and 148 analyses.
  • Percent Change From Late Switch (LS) Baseline (Week 48) Through Week 148 in Total Hip and Lumbar Spine BMD-CAR Late Switch Group Through Late Switch Phase [ Time Frame: LS Baseline (Week 48), Week 100 and Week 148 ]
    Percent change in BMD (expressed as areal density in g/cm^2) as specified by DEXA scans of the left 'total hip' which included the femoral neck, trochanter and inter-trochanter areas was assessed by areal density at indicated time points. Percent change in BMD as specified by DEXA scans of the 'lumbar spine' which included the first lumbar vertebra (L1) to the fourth lumbar vertebra (L4) was assessed by areal density at indicated time points. The last pre-switch value (Week 48) was considered as LS Baseline and percent change from LS Baseline was calculated as post-dose visit value minus LS Baseline value divided by LS Baseline value multiplied by 100. The analysis was based on Late-Switch Intent-to-Treat Exposed DEXA (LS-ITT-ED) Population which comprised of all participants in the LS-ITT-E Population, and who were registered for the DEXA study.
  • Change From Baseline in Total Hip and Lumbar Spine BMD at Week 48 Assessed by T-score and Z-score [ Time Frame: Baseline (Day 1) and Week 48 ]
    Total hip and lumbar spine BMD was assessed by T-scores and Z-scores. Day 1 was considered as Baseline. Change from Baseline was calculated as the value at Week 48 minus Baseline. DEXA scans of the left 'total hip' (femoral neck, hip, inter-trochanter areas, trochanter) and 'lumbar spine' (lumbar vertebral column) were performed. T-score is the number of standard deviations above or below the mean BMD of a 30-year-old participant of the same sex. Caucasian reference values were used for all participants to calculate T-scores. T-score values > -1.0 are considered normal, T-score values <= -1.0 to > -2.5 indicate osteopenia, T-score values <= -2.5 to <-3.5 indicate osteoporosis and T-score values <= -3.5 indicate severe osteoporosis. The Z-score is the number of standard deviations above or below the mean BMD for a reference population of same age and sex and in this study. Caucasian reference values were used in calculation of Z-scores.
  • Change From Baseline in Total Hip and Lumbar Spine BMD as Assessed by T-scores and Z-scores - DTG+RPV Early Switch Group Through Early and Late Switch Phase [ Time Frame: Baseline (Day 1), Week 48, Week 100 and Week 148 ]
    T-score is the number of standard deviations above or below the mean BMD of a 30-year-old participant of same sex. Caucasian reference values were used to calculate T- and Z- scores. T-score values: > -1.0 is normal; <= -1.0 to > -2.5 indicate osteopenia; <= -2.5 to <-3.5 indicate osteoporosis; <= -3.5 indicate severe osteoporosis. Z-score is the number of standard deviations above or below the mean BMD for a reference population of same age and sex in this study. Change from Baseline is post-dose visit value minus Baseline value. Data for Week 48 only represent final results of Week 48 Primary Endpoint analysis which applied DEXA scanner calibrations through Week 48, with no subsequent calibration applied. In the final analysis conducted at Week 148, DEXA scanner calibration data acquired from Day 1 to Week 148 was applied to all raw DEXA BMD data at Weeks 48, 100 and 148. Hence, actual values of Week 48 DEXA data may vary slightly between Weeks 48 and 148 analyses.
  • Change From LS Baseline (Week 48) Through Week 148 in Total Hip and Lumbar Spine BMD as Assessed by T-scores and Z-scores-CAR Late Switch Group Through Late Switch Phase [ Time Frame: LS Baseline (Week 48), Week 100, Week 148 ]
    The last pre-switch value (Week 48) was considered as LS Baseline and change from LS Baseline was calculated as the post-dose visit value minus LS Baseline value. DEXA scans of the left 'total hip' (femoral neck, hip, inter-trochanter areas, trochanter) and 'lumbar spine' (lumbar vertebral column) were performed. T-score is the number of standard deviations above or below the mean BMD of a 30-year-old participant of the same sex. Caucasian reference values were used for all participants to calculate T-scores. T-score values > -1.0 are considered normal, T-score values <= -1.0 to > -2.5 indicate osteopenia, T-score values <= -2.5 to <-3.5 indicate osteoporosis and T-score values <= -3.5 indicate severe osteoporosis. The Z-score is the number of standard deviations above or below the mean BMD for a reference population of same age and sex and in this study. Caucasian reference values were used in calculation of Z-scores.
  • Percent Change From Baseline in Total Hip and Lumbar Spine BMD at Week 48 by Baseline Third Agent [ Time Frame: Baseline (Day 1) and Week 48 ]
    Total hip and lumbar spine BMD (expressed as areal density in g/cm^2) assessed by third agent class (INSTI, NNRTI, PI) at indicated time points. Percent change from Baseline was calculated as value at Week 48 minus Baseline value divided by Baseline value multiplied by 100. Value at Day 1 was considered as Baseline. An ANCOVA model adjusted for Baseline BMD values was used to compare the difference in percent change from Baseline to Week 48 in total hip BMD or in lumbar spine BMD between the DTG+RPV and CAR arms by third agent class: INSTI, NNRTI or PI.
  • Change From Baseline in Total Hip and Lumbar Spine BMD T-scores and Z-scores at Week 48 by Baseline Third Agent [ Time Frame: Baseline (Day 1) and Week 48 ]
    Total hip and lumbar spine BMD was assessed by Baseline third agent class (INSTI, NNRTI, PI) using T-scores and Z-scores at Baseline and Week 48. DEXA scans of hip and spine were performed. Value at Day 1 was considered as Baseline. Change from Baseline was calculated as the value at Week 48 minus Baseline value. T-score is the number of standard deviations above or below the mean BMD of a 30-year-old participant of the same sex. Caucasian reference values were used for all participants to calculate T-scores. T-score values > -1.0 are considered normal, T-score values <= -1.0 to > -2.5 indicate osteopenia, T-score values <= -2.5 to <-3.5 indicate osteoporosis and T-score values <= -3.5 indicate severe osteoporosis. The Z-score is the number of standard deviations above or below the mean BMD for a reference population of same age and sex and in this study. Caucasian reference values were used in calculation of Z-scores.
  • Percent Change From Baseline (Day 1) in Total Hip and Lumbar BMD by Baseline Third Agent-DTG+RPV Early Switch Group Through Early and Late Switch Phase [ Time Frame: Baseline (Day 1), Week 48, Week 100 and Week 148 ]
    Total hip and lumbar spine BMD (expressed as areal density in g/cm^2) assessed by third agent class (INSTI, NNRTI, PI) at indicated time points. Percent change from Baseline was calculated as post-dose value minus Baseline value divided by Baseline value multiplied by 100. BMD parameters expressed as areal density (g/cm^2) at Weeks 48, 100 and 148 reflect data adjusted following the ongoing longitudinal and cross-calibration of the multiple DEXA scanner instruments in this study. Data and analyses presented through Week 48 only represent the final results of Week 48 Primary Endpoint analysis which applied DEXA scanner calibrations though Week 48, with no subsequent calibration applied. In the final analysis conducted at Week 148, DEXA scanner calibration data acquired from Day 1 to Week 148 was applied to all raw DEXA BMD data at Weeks 48, 100 and 148. Hence, the actual values of Week 48 DEXA data may vary slightly between the Week 48 and Week 148 analyses.
  • Change From Baseline (Day 1) in Total Hip and Lumbar Spine BMD T-scores and Z-scores by Baseline Third Agent-DTG+RPV Early Switch Group Through Early and Late Switch Phase [ Time Frame: Baseline (Day 1), Week 48, Week 100 and Week 148 ]
    T-score is the number of standard deviations above or below the mean BMD of a 30-year-old participant of same sex. Caucasian reference values were used to calculate T- and Z-scores. T-score values > -1.0 is normal; <= -1.0 to > -2.5 indicate osteopenia; <= -2.5 to <-3.5 indicate osteoporosis; <= -3.5 indicate severe osteoporosis. Z-score is the number of standard deviations above or below the mean BMD for a reference population of same age and sex in this study. Change from Baseline is the post-dose value minus Baseline value. Data for Week 48 only represents final results of Week 48 Primary Endpoint analysis which applied DEXA scanner calibrations through 48, with no subsequent calibration applied. In the final analysis conducted at Week 148, DEXA scanner calibration data acquired from Day 1 to Week 148 was applied to all raw DEXA BMD data at Weeks 48, 100 and 148. Hence, actual values of Week 48 DEXA data may vary slightly between Weeks 48 and 148 analyses.
  • Percent Change From LS Baseline (Week 48) Through Week 148 in Total Hip and Lumbar Spine BMD by Baseline Third Agent-CAR Late Switch Group Through Late Switch Phase [ Time Frame: LS Baseline (Week 48), Week 100 and Week 148 ]
    Total hip and lumbar spine BMD (expressed as areal density in g/cm^2) assessed by third agent class (INSTI, NNRTI, PI) at indicated time points. The last pre-switch value (Week 48) was considered as LS Baseline and percent change from LS Baseline was calculated as post-dose value minus LS Baseline value divided by LS Baseline value multiplied by 100.
  • Change From LS Baseline (Week 48) Through Week 148 in Total Hip and Lumbar Spine BMD T-scores and Z-scores by Baseline Third Agent-CAR Late Switch Group Through Late Switch Phase [ Time Frame: LS Baseline (Week 48), Week 100 and Week 148 ]
    Total hip and lumbar spine BMD was assessed by Baseline third agent (INSTI, NNRTI, PI) using T-scores and Z-scores at indicated time points. DEXA scans of hip and spine were performed. The last pre-switch value (Week 48) was considered as LS Baseline and change from LS Baseline was calculated as the post-dose value minus LS Baseline value. T-score is the number of standard deviations above or below the mean BMD of a 30-year-old participant of the same sex. Caucasian reference values were used for all participants to calculate T-scores. T-score values > -1.0 are considered normal, T-score values <= -1.0 to > -2.5 indicate osteopenia, T-score values <= -2.5 to <-3.5 indicate osteoporosis and T-score values <= -3.5 indicate severe osteoporosis. The Z-score is the number of standard deviations above or below the mean BMD for a reference population of same age and sex and in this study. Caucasian reference values were used in calculation of Z-scores.
Original Secondary Outcome Measures  ICMJE
 (submitted: June 17, 2015)
  • Percentage change from baseline at Week 48 in lumbar spine BMD as assessed by areal density in g/cm^2 [ Time Frame: Baseline and Week 48 ]
    BMD will be expressed as areal density in g/cm^2 generated from DEXA scans of lumbar spine which includes the first lumbar vertebra (L1) to the fourth lumbar vertebra (L4)
  • Percentage change from baseline through Week 148 in the DTG+RPV arm in lumbar spine and total hip BMD as assessed by areal density in g/cm^2 [ Time Frame: Baseline, Weeks 48, 100 and 148 ]
    BMD will be expressed as areal density in g/cm^2 generated from DEXA scans of lumbar spine and total hip as described
  • Percentage change from Week 48 through Week 148 (96 Weeks post switch) in the CAR arm in lumbar spine and total hip BMD as assessed by areal density in g/cm^2 [ Time Frame: Weeks 48, 100 and 148 ]
    BMD will be expressed as areal density in g/cm^2 generated from DEXA scans of lumbar spine and total hip as described
  • Change from baseline to Week 48 in lumbar spine and total hip BMD as assessed by T-scores and Z-scores [ Time Frame: Baseline and Week 48 ]
    BMD will be expressed as T-scores and Z-scores generated from DEXA scans of lumbar spine and total hip as described
  • Change from baseline through Week 148 in the DTG+RPV arm in lumbar spine and total hip BMD as assessed by T-scores and Z-scores [ Time Frame: Baseline Weeks 48, 100 and 148 ]
    BMD will be expressed as T-scores and Z-scores generated from DEXA scans of lumbar spine and total hip as described
  • Change from Week 48 through Week 148 (96 Weeks post switch) in the CAR arm in lumbar spine and total hip BMD as assessed by T-scores and Z-scores [ Time Frame: Weeks 48, 100 and 148 ]
    BMD will be expressed as T-scores and Z-scores generated from DEXA scans of lumbar spine and total hip as described
  • Percent change from baseline at Week 48 in lumbar spine and total hip BMD as assessed by areal density in g/cm^2 , and change from baseline in T-scores and Z-scores in both DTG + RPV and CAR arms by baseline third agent [ Time Frame: Baseline and Week 48 ]
    BMD will be expressed as areal density in g/cm^2, T-scores and Z-scores generated from DEXA scans of lumbar spine and total hip as described
  • Percent change from baseline through Week 148 in the DTG + RPV arm in lumbar spine and total hip BMD as assessed by areal density in g/cm^2, and change from baseline in T-scores and Z-scores by baseline third agent [ Time Frame: Baseline Weeks 48, 100 and 148 ]
    BMD will be expressed as areal density in g/cm^2, T-scores and Z-scores generated from DEXA scans of lumbar spine and total hip as described
  • Percent change from Week 48 through Week 148 (96 Weeks post switch) in the CAR arm in lumbar spine and total hip BMD as assessed by areal density in g/cm^2, and change from baseline in T-scores and Z-scores by baseline third agent. [ Time Frame: Weeks 48, 100 and 148 ]
    BMD will be expressed as areal density in g/cm^2, T-scores and Z-scores generated from DEXA scans of lumbar spine and total hip as described
Current Other Pre-specified Outcome Measures Not Provided
Original Other Pre-specified Outcome Measures Not Provided
 
Descriptive Information
Brief Title  ICMJE Bone Mineral Density in Human Immunodeficiency Virus Type 1 (HIV-1)-Infected Adult Subjects Switching From a Tenofovir Regimen to a Dolutegravir Plus Rilpivirine Regimen
Official Title  ICMJE An Evaluation of Bone Mineral Density in HIV-1-infected Adult Subjects Switching From a Tenofovir-containing Antiretroviral Therapy Regimen to a Dolutegravir Plus Rilpivirine Regimen
Brief Summary

The purpose of this study is to evaluate any change from baseline in bone mineral density (BMD) in subjects following the switch from a triple antiretroviral therapy (ART) regimen containing Tenofovir disoproxil fumarate (TDF) to the nucleoside reverse transcriptase inhibitor (NRTI) - sparing two - drug regimen of dolutegravir (DTG) + rilpivirine (RPV) in subjects participating in the parent studies 201636 and 201637 (SWORD-1 and SWORD-2).

This open-label, parallel group, study is a sub-study which will recruit subjects who are receiving ART regimens which include TDF at the time of randomization to receive treatment in one of two identical parent studies 201636 and 201637 (SWORD-1 and SWORD-2). These are Phase III, randomised, open-label, multicentre, parallel-group, non-inferiority studies evaluating the efficacy, safety, and tolerability of switching to DTG plus RPV from current integrase inhibitor (INI)-, non NNRTI-, or protease inhibitor (PI)-based antiretroviral regimen in HIV-1-infected adults who are virologically suppressed, having HIV-1 ribonucleic acid (RNA) levels <50 copies per millilitre (c/mL). Randomisation in the parent studies will be stratified by baseline third agent class (INI, NNRTI, or PI), age group (< or =>50 years old) and participation in this Dual energy X-ray absorptiometry (DEXA) sub-study, therefore there will also be balance across the treatment arms in this sub-study both overall and with respect to baseline third agent class and age at entry.

The study population will include approximately 75 evaluable subjects recruited from the Early Switch DTG + RPV treatment group of the parent studies 201636 and 201637, and approximately 75 evaluable subjects from the Late Switch group who continue their current antiretroviral therapy (CAR) through to Week 52 across both the 201636 and 201637 (SWORD-1 and SWORD-2) studies. Subjects participating in study 202094 will have DEXA scans performed at Day 1 and at study Weeks 48, 100 and 148 in parallel with the corresponding scheduled visits in the parent studies.

Detailed Description Not Provided
Study Type  ICMJE Interventional
Study Phase  ICMJE Phase 3
Study Design  ICMJE Allocation: Non-Randomized
Intervention Model: Parallel Assignment
Masking: None (Open Label)
Primary Purpose: Treatment
Condition  ICMJE HIV Infections
Intervention  ICMJE Drug: Subjects do not receive study medication in this study 202094
Participants do not receive study medication in this study 202094.
Study Arms  ICMJE
  • Active Comparator: CAR
    Participants do not receive study medication in this study 202094. Participants group carried over from the parent study 201636 (SWORD-1) or 201637 (SWORD-2).
    Intervention: Drug: Subjects do not receive study medication in this study 202094
  • Experimental: DTG 50 mg + RPV 25 mg
    Participants do not receive study medication in this study 202094. Participants group carried over from the parent study 201636 (SWORD-1) or 201637 (SWORD-2)
    Intervention: Drug: Subjects do not receive study medication in this study 202094
Publications * McComsey GA, Lupo S, Parks D, Poggio MC, De Wet J, Kahl LP, Angelis K, Wynne B, Vandermeulen K, Gartland M, Cupo M, Aboud M; 202094 Sub-Study Investigators. Switch from tenofovir disoproxil fumarate combination to dolutegravir with rilpivirine improves parameters of bone health. AIDS. 2018 Feb 20;32(4):477-485. doi: 10.1097/QAD.0000000000001725.

*   Includes publications given by the data provider as well as publications identified by ClinicalTrials.gov Identifier (NCT Number) in Medline.
 
Recruitment Information
Recruitment Status  ICMJE Completed
Actual Enrollment  ICMJE
 (submitted: October 17, 2016)
102
Original Estimated Enrollment  ICMJE
 (submitted: June 17, 2015)
150
Actual Study Completion Date  ICMJE August 17, 2018
Actual Primary Completion Date September 16, 2016   (Final data collection date for primary outcome measure)
Eligibility Criteria  ICMJE

Inclusion Criteria:

  • Screened and eligible but not yet randomised to either of the parent studies 201636 (SWORD-1) or 201637 (SWORD-2)
  • Receiving an ART regimen which contains TDF
  • Female subjects of child bearing potential with a negative pregnancy test at both Screening and Day 1 and agrees to use one of the methods of contraception described in the protocols of the parent studies 201636 (SWORD-1) and 201637 (SWORD-2) to avoid pregnancy. Any contraception method must be used consistently, throughout the study period in accordance with the approved product label, including adherence to appropriate 'run in' periods for hormonal contraception
  • Subject is willing and able to understand the requirements of study participation and provide signed and dated written informed consent prior to Screening. Subject is considered an appropriate candidate for participation in this study
  • For subjects enrolled in France: a subject will be eligible for inclusion in this study only if either affiliated to or a beneficiary of a social security category

Exclusion Criteria:

  • Less than three vertebra in the range of L1 to L4 that are suitable for BMD measurement by DEXA scan
  • Bilateral hip replacement
  • Uncontrolled thyroid disease: thyroid stimulating hormone (TSH) above normal range, and considered to indicate a requirement for thyroid replacement therapy
  • Male hypogonadism: serum testosterone < 300 nanogram per decilitre (ng/dL) on a sample collected before 10:00 in the morning and the subject is able and willing to start testosterone replacement therapy
  • Endocrine diseases including Cushing's syndrome and diabetes mellitus
  • History of fragility fractures
  • Ever treated for osteoporosis with bisphosphonates, oestrogen receptor modulators or other therapies, and / or severe osteoporosis as indicated by a prior DEXA scan derived T-score of -3.5 or lower value
  • Body mass index (BMI) < 18 kilogram per meter (kg/m)^2 or =>40 kg/m^2
  • Vitamin D deficiency: 25 Hydroxy Vitamin D < 15ng/mL
  • Any pre-existing physical or mental condition (including substance abuse disorder) which, in the opinion of the investigator, may interfere with the subject's ability to comply with the scheduled protocol evaluations or which may compromise the safety of the subject
  • Current use or intent to initiate, tamoxifen, bone-related treatment, e.g. biphosphonates, osteoporosis medications including selective oestrogen receptor modulator medicines (raloxifene, arzoxifene and lasofoxifene), growth hormone or anabolic steroids, except for testosterone as specified below, during the study period
  • The following are excluded unless they have been given for at least 6 months prior to Day 1, and there is no plan to stop them during the study: Anti-convulsant therapy and hormonal therapy, including female hormone replacement therapy or testosterone as a replacement therapy or supplement
  • Women who are pregnant, breastfeeding or who plan to become pregnant or breast feed during the study period
  • Subject enrolled, or anticipated to be selected to participate following study registration, in an investigational clinical protocol/s in addition to one of the parent studies 201636 or 201637 (SWORD-1 or SWORD-2)
Sex/Gender  ICMJE
Sexes Eligible for Study: All
Ages  ICMJE 18 Years and older   (Adult, Older Adult)
Accepts Healthy Volunteers  ICMJE No
Contacts  ICMJE Contact information is only displayed when the study is recruiting subjects
Listed Location Countries  ICMJE Argentina,   Belgium,   Canada,   Spain,   United Kingdom,   United States
Removed Location Countries  
 
Administrative Information
NCT Number  ICMJE NCT02478632
Other Study ID Numbers  ICMJE 202094
Has Data Monitoring Committee No
U.S. FDA-regulated Product Not Provided
IPD Sharing Statement  ICMJE
Plan to Share IPD: Yes
Plan Description: IPD for this study will be made available via the Clinical Study Data Request site.
Supporting Materials: Study Protocol
Supporting Materials: Statistical Analysis Plan (SAP)
Supporting Materials: Informed Consent Form (ICF)
Supporting Materials: Clinical Study Report (CSR)
Time Frame: IPD is available via the Clinical Study Data Request site (click on the link provided below)
Access Criteria: Access is provided after a research proposal is submitted and has received approval from the Independent Review Panel and after a Data Sharing Agreement is in place. Access is provided for an initial period of 12 months but an extension can be granted, when justified, for up to another 12 months.
URL: https://clinicalstudydatarequest.com/Posting.aspx?ID=20273
Current Responsible Party ViiV Healthcare
Original Responsible Party Same as current
Current Study Sponsor  ICMJE ViiV Healthcare
Original Study Sponsor  ICMJE Same as current
Collaborators  ICMJE
  • Janssen Pharmaceuticals
  • GlaxoSmithKline
Investigators  ICMJE
Study Director: GSK Clinical Trials ViiV Healthcare
PRS Account ViiV Healthcare
Verification Date September 2020

ICMJE     Data element required by the International Committee of Medical Journal Editors and the World Health Organization ICTRP