Prizma Pulse Oximeter Evaluation
|The safety and scientific validity of this study is the responsibility of the study sponsor and investigators. Listing a study does not mean it has been evaluated by the U.S. Federal Government. Read our disclaimer for details.|
|ClinicalTrials.gov Identifier: NCT03080688|
Recruitment Status : Completed
First Posted : March 15, 2017
Last Update Posted : March 15, 2017
This study is intended to evaluate performance of the new design sufficiently to support performance claims for an FDA 510K submission or ISO technical file. Specifically:
- SpO2 value range 70% to 100%
- 10 or more subjects, at least 3 of dark pigmentation
- At least 200 data points
- Meeting the following test required by the 2013 FDA Guidance on Pulse Oximeters - Premarket Notification Submissions and by ISO 80601-2-61 on Pulse Oximeters:
2013 FDA Guidance on Pulse Oximeters - Premarket Notification Submissions:
- 4.1. ACCURACY OF PULSE OXIMETERS
- 4.1.1 IN VIVO TESTING FOR SPO2 ACCURACY UNDER LABORATORY CONDITIONS
ISO 80601-2-61:2011 Annex EE.2 and clause 184.108.40.206.2
- 220.127.116.11 SpO2 accuracy of pulse oximeter equipment
- 18.104.22.168.2 Determination of SpO2 accuracy
|Condition or disease||Intervention/treatment|
|Oxygen Deficiency||Device: Prizma Oxygen Saturation Measurement|
The device under test was the Prizma which is a phone cover biometric device that includes reflectance oximetry. This device is a spot checker that requires the patient to hold their finger on the sensor during the measurement. The subjects were asked not to move during the study. In order to get consistent measurements the fingers were taped to the test device. The tape acted mainly as a reminder, and there were some problems with finger movement. A radial arterial cannula was placed in either the left or right wrist of each subject.
Blood gas analysis to determine oxyhemoglobin saturation was performed on an OSM-3® multi-wavelength oximeter (Hemoximeter, Radiometer, Copenhagen). No subject was anemic (Hemoglobin ≤ 10gm•dl-1). Each subject had control data taken at the beginning of each experiment, with two control blood samples drawn while breathing room air. Hypoxia was induced to different levels of oxyhemoglobin saturation (between 70-100%) by having subjects breathe mixtures of nitrogen, room air, and carbon dioxide. Oxyhemoglobin saturation was reduced to a series of targets and stabilized at the plateau value. Each plateau level of oxyhemoglobin saturation was maintained for at least 30 seconds. Two arterial blood samples were then obtained, approximately 30 seconds apart. A total of 24 samples were obtained per subject. Data were recorded by Bickler-Ye lab and provided for analysis.
|Study Type :||Observational|
|Actual Enrollment :||12 participants|
|Official Title:||Prizma Pulse Oximeter Evaluation|
|Actual Study Start Date :||April 15, 2016|
|Actual Primary Completion Date :||April 15, 2016|
|Actual Study Completion Date :||April 16, 2016|
Measurement of oxyhemoglobin saturation by OSM-3 oximeter and Prizma oxygen saturation measurement
Device: Prizma Oxygen Saturation Measurement
A radial arterial cannula was placed in either the left or right wrist of each subject.
Blood gas analysis to determine oxyhemoglobin saturation was performed on an OSM-3® multi-wavelength oximeter (Hemoximeter, Radiometer, Copenhagen). No subject was anemic (Hemoglobin ≤ 10gm•dl-1).
- Blood oxygen saturation [ Time Frame: 2 days ]Comparison of Measurements: Prizma Device versus Gold Standard