Comparison of Three Fixation Techniques for Displaced Distal Radius Fractures (DRF)
|The safety and scientific validity of this study is the responsibility of the study sponsor and investigators. Listing a study does not mean it has been evaluated by the U.S. Federal Government. Read our disclaimer for details.|
|ClinicalTrials.gov Identifier: NCT00524719|
Recruitment Status : Completed
First Posted : September 5, 2007
Last Update Posted : May 11, 2020
Distal radius fractures are the most common fracture to occur in the adult population, and those which are displaced but maintain joint congruity are the most common subtype. Locking-plate technology represents a true advance in the fixation of these fractures, especially in view of the ever increasing incidence of these injuries in an ageing and osteoporotic population throughout Europe and North America. These plates permit rigid fixation, even in osteopenic bone, while avoiding any tethering of soft tissues, as seen with external fixation and percutaneous pinning. For these reasons, this mode of fracture fixation has rapidly gained popularity. Unfortunately, there is presently little evidence to support their use over the more traditional methods of fixation (percutaneous pinning, external fixation). In addition, the technique for their application is more invasive and their cost is considerably greater than these latter two techniques. As such, it is pertinent to evaluate, in a scientifically sound fashion, the outcome of fixation with the three types of implant included in this study. The results of this clinical trial will allow the orthopaedic community to confidently recommend the fixation method which provides the optimal functional, clinical, and radiographic outcome for a patient suffering a displaced distal radius with preserved joint congruity.
Null hypothesis: There is no difference in the functional, clinical, and radiographic outcomes of the three treatment methods.
Hypothesis: Given the locking nature of modern screw-plate constructs, which produce excellent fixation even in osteopenic bone and permit early range of motion exercises; and given that plate fixation, in contrast to external fixation and percutaneous pinning, does not tether muscle, tendon, or capsule; plate fixation with a volar fixed-angle device should permit earlier and more aggressive rehabilitation and more rapid and complete regain of hand and wrist function when compared to stabilization with external fixation or percutaneous pinning.
|Condition or disease||Intervention/treatment||Phase|
|Distal Radius Fractures||Procedure: Open Reduction and Internal Fixation Procedure: Non-Spanning External Fixation Procedure: Closed Reduction with Percutaneous Fixation||Not Applicable|
Fractures of the distal radius, the most common fracture to occur in adults, are increasing in incidence and cost due to ageing of the population and the link with senile osteoporosis. Young adults also suffer these injuries albeit involving higher-energy mechanisms. Closed reduction and casting is often unsuccessful in maintaining adequate alignment and length, both of which are crucial to a successful outcome. Thus, there has been a trend toward surgical treatment of these fractures. In fractures with preserved joint congruity, 3 fixation options exist: percutaneous pinning (Kapandji technique), non-spanning external fixation, and locked-plates. Locked-plates represent a significant advance in the fixation of fractures, especially in osteopenic bone, although their role in distal radius fractures has yet to be defined adequately. The Cochrane Group undertook a meta-analysis of RC trials "to determine when, and if so what type of, surgical intervention is the most appropriate treatment for fractures of the distal radius in adults." The authors concluded: "there is a need for good quality evidence for the surgical management of these fractures." The aim of this randomized clinical trial is to compare the functional, clinical, and radiographic outcomes of these 3 methods. The results will clearly guide surgeons in the choice of optimal technique.
This multicenter prospective randomized trial will involve the Canadian Orthopaedic Trauma Society (COTS), an association of trauma surgeons involved in collaborative outcomes research with a proven track record of research and publication. Patients with a displaced distal radius fracture with joint congruity who meet all eligibility criteria and provide consent to participate will be randomly assigned to reduction and fixation with one of three methods: volar locked-plate, percutaneous pinning and cast (Kapandji intra-focal technique), or non-spanning external fixation. Patients will undergo physiotherapy according to protocols adapted to fixation technique. Evaluation at fixed intervals will include functional, clinical, and radiological parameters. Functional evaluation will include the PRWE, DASH, and SMFA questionnaires. Clinical outcome will evaluate range of motion, pinch and grip strength, and dexterity. Standard radiographic parameters will be measured. The primary outcome measure will be functional outcome as measured with the PRWE. Appropriate statistical analyses will be performed on the data. Sample size calculation reveals the need for 108 patients per treatment arm. A census of the centers committed to the study predicts a 12-18 month recruitment period. Patient follow-up will end at 2 years.
|Study Type :||Interventional (Clinical Trial)|
|Actual Enrollment :||203 participants|
|Intervention Model:||Parallel Assignment|
|Masking:||None (Open Label)|
|Official Title:||A Prospective Randomised Trial Comparing Open Reduction and Internal Fixation, Non-Spanning External Fixation, and Closed Reduction With Percutaneous Fixation in Displaced Distal Radius Fractures With Joint Congruity|
|Study Start Date :||January 2007|
|Actual Primary Completion Date :||December 2016|
|Actual Study Completion Date :||April 3, 2019|
Active Comparator: Open, internal fixation volar plate
Open reduction and internal fixation (ORIF) with volar locked plate
Procedure: Open Reduction and Internal Fixation
Fixation with volar locked plate
Active Comparator: Closed reduction with external fixator
Surgical procedure - Closed reduction and non-spanning external fixation (Ex-FIX)
Procedure: Non-Spanning External Fixation
Radio-radial external fixation
Active Comparator: Closed reduction percutaneous pinning
Surgical procedure - Closed reduction with percutaneous pinning (CRPP) and the application of a cast
Procedure: Closed Reduction with Percutaneous Fixation
Percutaneous intrafocal pinning (Kapandji technique)
- Primary Outcome Variable: Validated functional outcome tools to be used: patient rated wrist evaluation (PRWE) disability shoulder, arm, hand (DASH) short musculoskeletal functional assessment (SMFA) [ Time Frame: 6 weeks; 3,6,12 and 24 months ]
- Secondary Outcome Measures: Clinical outcome: measurement of range of motion (ROM), strength (grip and pinch), and dexterity (Jebsen hand function-checkers sub-test). Radiologic outcome: X-ray parameters [ Time Frame: 6 weeks; 3,6,12 and 24 months ]
To learn more about this study, you or your doctor may contact the study research staff using the contact information provided by the sponsor.
Please refer to this study by its ClinicalTrials.gov identifier (NCT number): NCT00524719
|McGill University Health Centre - Montreal General Hospital|
|Montreal, Quebec, Canada, H3G 1A4|
|Principal Investigator:||Greg K Berry, MD FRCSC||McGill University Health Centre/Research Institute of the McGill University Health Centre|