XiVE® CAD/CAM Bridges (Abutment-supported/ Implant-supported) (XiCC)
| Tracking Information | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| First Received Date ICMJE | January 23, 2012 | ||||||||
| Last Updated Date | January 4, 2013 | ||||||||
| Start Date ICMJE | November 2011 | ||||||||
| Estimated Primary Completion Date | August 2014 (final data collection date for primary outcome measure) | ||||||||
| Current Primary Outcome Measures ICMJE |
Mean change of bone level [ Time Frame: 0, 12, 24 months ] [ Designated as safety issue: No ] Intra-oral radiographs from implant insertion and at time for prosthesis insertion as well as from 1 and 2-year follow-up visits (calculated from the time of loading) should be taken for evaluation of bone level. All radiographs will be examined by an independent dentist. For the purpose of this examination XCP film holder (DENTSPLY Rinn, 1212 Abbott Drive, Elgin, Illinois 60123-1819, USA) are individualized for each subject and for each x-ray. |
||||||||
| Original Primary Outcome Measures ICMJE | Same as current | ||||||||
| Change History | Complete list of historical versions of study NCT01522365 on ClinicalTrials.gov Archive Site | ||||||||
| Current Secondary Outcome Measures ICMJE |
Sulcus-fluid-flow-rate [ Time Frame: 6 weeks, 6, 12, 24 months ] [ Designated as safety issue: No ] The evaluation of the sulcus fluid flow rate (SFFR) is a common method for the objective definition of the gingiva inflammation level in clinical research. The SFFR is measured with the electronic sulcus fluid hygrometer, Periotron model 600 A No. 700702 (Harco Electronics Ltd., Canada) and always as the first procedure in order not to be influenced by other investigation parameters. |
||||||||
| Original Secondary Outcome Measures ICMJE | Same as current | ||||||||
| Current Other Outcome Measures ICMJE | Not Provided | ||||||||
| Original Other Outcome Measures ICMJE | Not Provided | ||||||||
| Descriptive Information | |||||||||
| Brief Title ICMJE | XiVE® CAD/CAM Bridges (Abutment-supported/ Implant-supported) | ||||||||
| Official Title ICMJE | A Randomized, Prospective, International, Multi-center Clinical Study to Evaluate the Peri-implant Tissue Outcome of Abutment-supported XiVE® CAD/CAM Supra-structures and Directly Implant-supported XiVE® CAD/CAM Supra-structures (Split-mouth) in Partly Edentulous Human Subjects. | ||||||||
| Brief Summary | This study has been designed in order to collect data with regards to the peri-implant tissue outcome of abutment-supported restoration and direct implant-fixed restoration. Therefore a small group of subjects with partly edentulous maxilla is selected to show that both techniques are efficient and safe and to show comparable peri-implant tissue outcome for both methods. At the time of impression forming for each centre treatment A (= abutment-supported XiVE® CAD/CAM supra-structure) and B (= direct implant-fixed XiVE® CAD/CAM supra-structure) is assigned to the left and right side of the maxilla by being randomized at the time of impression forming. |
||||||||
| Detailed Description | The planned study profile is to assess the peri-implant tissue outcome of abutment-supported restoration and direct implant-fixed restoration. Two treatments, Treatment A which is the abutment-fixed supra-structure and Treatment B, the direct implant-fixed restoration, are assessed within the scope of this clinical investigation. Treatment A: The XiVE® CAD/CAM supra-structure is fixed on abutments. The effect of platform-switching which is discussed intensely in the scientific literature is used in order to shift away the connection between implant and supra-construction (interface) from the implant edge and peri-implant tissue and towards the implant centre. However, the implant-abutment-connection area is a potential entry port for micro-organisms which have direct influence on the state of the peri-implant hard and soft tissue and consequently on the long-term prosthetic and implant success [8]. By using an abutment as a connector between implant and supra-structure implies the generation of one more micro-gap (between supra-structure and abutment) and possible retention of microbial plaque though located above the hard tissue level. Treatment B: The XiVE® CAD/CAM supra-structure is fixed directly on the implants. In contrary to treatment A, only one entry port (micro-gap) for micro-organisms exists: The interface between supra-construction and implant. So, there is one main point where the initial force has main influence on the implant and the peri-implant tissue [8-10]. Besides, this interface lies directly on the implant shoulder level and by that on the osseous level. There is no displacement of the transitional area to the implant centre. This study has been designed in order to collect data with regards to the CAD/CAM system used on the DENTSPLY Friadent implant system XiVE®. In particular, the peri-implant tissue outcome of abutment-supported restoration and direct implant-fixed restoration will be evaluated. Therefore a small group of subjects with partly edentulous jaw is selected to show that both techniques are efficient and safe and to demonstrate the non-inferiority with regards to the peri-implant tissue outcome for any of both techniques. Each subject will receive both treatments, treatment A on the one site of the maxilla and treatment B on the other. The randomization method which finally defines which subject receives one treatment on the left maxilla region and the other on the right maxilla area or vice versa is described in section 5.1. In conclusion, both treatments might have pros and cons which may affect the peri-implant tissue outcome. |
||||||||
| Study Type ICMJE | Interventional | ||||||||
| Study Phase | Not Provided | ||||||||
| Study Design ICMJE | Allocation: Randomized Intervention Model: Parallel Assignment Masking: Open Label Primary Purpose: Treatment |
||||||||
| Condition ICMJE | Partly Edentulous Maxilla | ||||||||
| Intervention ICMJE |
|
||||||||
| Study Arm (s) |
|
||||||||
| Publications * | Not Provided | ||||||||
|
* Includes publications given by the data provider as well as publications identified by ClinicalTrials.gov Identifier (NCT Number) in Medline. |
|||||||||
| Recruitment Information | |||||||||
| Recruitment Status ICMJE | Recruiting | ||||||||
| Estimated Enrollment ICMJE | 20 | ||||||||
| Estimated Completion Date | December 2014 | ||||||||
| Estimated Primary Completion Date | August 2014 (final data collection date for primary outcome measure) | ||||||||
| Eligibility Criteria ICMJE | Inclusion Criteria:
Exclusion Criteria:
|
||||||||
| Gender | Both | ||||||||
| Ages | 18 Years and older | ||||||||
| Accepts Healthy Volunteers | No | ||||||||
| Contacts ICMJE |
|
||||||||
| Location Countries ICMJE | Germany, United Kingdom | ||||||||
| Administrative Information | |||||||||
| NCT Number ICMJE | NCT01522365 | ||||||||
| Other Study ID Numbers ICMJE | DF0909-1-272-1x-1 | ||||||||
| Has Data Monitoring Committee | No | ||||||||
| Responsible Party | Dentsply Implants Manufacturing GmbH | ||||||||
| Study Sponsor ICMJE | Dentsply Implants Manufacturing GmbH | ||||||||
| Collaborators ICMJE | Not Provided | ||||||||
| Investigators ICMJE |
|
||||||||
| Information Provided By | Dentsply Implants Manufacturing GmbH | ||||||||
| Verification Date | January 2013 | ||||||||
|
ICMJE Data element required by the International Committee of Medical Journal Editors and the World Health Organization ICTRP |
|||||||||