RSA for a Comparison of MIS vs. Standard Exposure in Total Hip Arthroplasty

This study is ongoing, but not recruiting participants.
Sponsor:
Collaborator:
Wright Medical Technology
Information provided by (Responsible Party):
Dalhousie University
ClinicalTrials.gov Identifier:
NCT00405483
First received: November 28, 2006
Last updated: April 1, 2014
Last verified: March 2014

November 28, 2006
April 1, 2014
October 2005
December 2014   (final data collection date for primary outcome measure)
The purpose of this study is to determine if MIS for primary hip replacement surgery increases the risk of long term aseptic loosening as predicted by implant micromotion detected by radiostereometric analysis [ Time Frame: 2 years ] [ Designated as safety issue: No ]
The purpose of this study is to determine if MIS for primary hip replacement surgery increases the risk of long term aseptic loosening as predicted by implant micromotion detected by radiostereometric analysis
Complete list of historical versions of study NCT00405483 on ClinicalTrials.gov Archive Site
Not Provided
Not Provided
Not Provided
Not Provided
 
RSA for a Comparison of MIS vs. Standard Exposure in Total Hip Arthroplasty
A Randomized Controlled Trial Utilizing RSA for a Comparison of Minimally Invasive Surgery (MIS) vs. Standard Exposure in Primary Total Hip Arthroplasty With the ProfemurZ Modular Femoral Stem

The purpose of this study is to determine if MIS for primary hip replacement surgery increases the risk of long term aseptic loosening as predicted by implant micromotion detected by radiostereometric analysis.

Hip replacement is an effective option for treating chronic hip conditions that cause pain and functional impairment(1). Significant improvements in quality of life, as measured by both disease specific and generic quality of life measures, have been well documented (2-4).

Hip replacement implants are a 'ball in cup' design, and consist of two articulating components: a femoral head replacement which can consist of a ball attached to a stem that is inserted into the proximal femur, and an acetabular component, which can be made of different materials that are inserted into a liner of metal that is inserted into the pelvis. These components can be attached to the patient's bone using either polymethylmethacrylate - a polymer more commonly referred to as bone cement - or by roughening the surface of the implant to allow bone ingrowth. Hip replacements can therefore be broadly classified by the fixation technique used: cemented, uncemented, or hybrid, consisting of a cemented femoral component and an uncemented acetabular component. The uncemented design is very commonly used in younger patients because the quality of bone is better in the patient, the implants have demonstrated long term survival, and the cementing step is no longer necessary for achieving long term fixation.

The 10 year survival of current uncemented total hip designs approaches 95% (5). The majority of the 5% that are revised are done so for aseptic ("non-infected") loosening of the components. The functional results of revision total hip surgery are poorer than primary hip replacement surgery (3, 5, 6). There are approximately 20 000 hip replacement performed each year in Canada (CIHI website); this will result in roughly 1000 revisions over the next 10 years - a great expense, both in terms of health care resources and in patients' loss of function. Obviously, efforts directed at decreasing revision rates are clinically and financially worthwhile.

Implant failure due to aseptic loosening is thought to arise from both patient related factors such as age, sex and diagnosis, and from implant related factors such as design and materials used (5). Efforts at reducing aseptic loosening by changing implant design and cement formulation have occasionally resulted in products that perform well in the laboratory but fail miserably in real life, often after being implanted into large numbers of patients(7-10). This has led to a call for careful and controlled introduction of new implant designs using randomized trials and precise radiographic assessment techniques such as radiostereometric analysis (RSA) to look for early signs of loosening and impending failure (7, 9, 11).

Minimally Invasive Surgery (MIS) is a new technology in the optimization of healthcare services. It has been developed to minimize damage to surrounding tissue during arthroplasty. by reducing the size of the incision. The possible benefit is dramatic reductions in length of stay (LOS) for total hip replacement (THR) patients (12). However, MIS development has led to modifications to existing instrumentation, prostheses and technique which may impact long-term survival of the implant (13). There has been little research investigating the effects of these changes on long-term patient outcomes following MIS surgery. The use of RSA will allow for better understanding of the early fixation of the implant and the potential for early failure due to aseptic loosening.

Interventional
Not Provided
Allocation: Randomized
Endpoint Classification: Efficacy Study
Intervention Model: Parallel Assignment
Masking: Single Blind (Subject)
Primary Purpose: Treatment
Osteoarthritis
  • Procedure: Standard exposure
    Minimal invasive vs standard exposure of the joint is the difference between a small incision, smaller equipment for less tissue damage vs large incision (standard is greater than 10cm)and subsequent more tissue damage.
    Other Name: Surgical technique, standard exposure in hip arthroplasty
  • Procedure: Minimally Invasive
    Minimally invasive surgical technique (minimal incision)
  • Active Comparator: Minimally invasive exposure
    Surgical technique, minimal incision
    Intervention: Procedure: Minimally Invasive
  • Active Comparator: Standard exposure
    Standard Incision
    Intervention: Procedure: Standard exposure
Not Provided

*   Includes publications given by the data provider as well as publications identified by ClinicalTrials.gov Identifier (NCT Number) in Medline.
 
Active, not recruiting
100
December 2014
December 2014   (final data collection date for primary outcome measure)

Inclusion Criteria:

  • Subjects are under the age of 65 years
  • Subjects have not had hip replacement surgery on the affected hip
  • Subjects have decided to undergo a primary total hip replacement of the affected hip

Exclusion Criteria:

  • Having a previous hip infection
  • Undergoing surgery for arthritis due to a previous injury, rheumatoid arthritis or hip dysplasia (a hip that did not develop completely)
Both
21 Years to 65 Years
No
Contact information is only displayed when the study is recruiting subjects
Canada
 
NCT00405483
DAL06-03
No
Dalhousie University
Dalhousie University
Wright Medical Technology
Principal Investigator: Michael Gross, MD FRCSC Dalhousie University & Capital District Health Authority
Dalhousie University
March 2014

ICMJE     Data element required by the International Committee of Medical Journal Editors and the World Health Organization ICTRP